H 32 inches x W 15 inches x D 16 inches

1 year on unit including fan motor, excluding filters

The Cleanroom Series provides a choice of 2 models, each with a specific filter efficiency and air delivery profile. While healthcare facilities may require higher air delivery to achieve optimum control of microorganisms (e.g. in ICUs or TB isolation rooms), a cleanroom facility may need a filtration efficiency of 99.97 percent to meet strict manufacturing regulations or standards.

* Microbiological control in hospitals
* Clean production areas
* Clean research areas
* Pharmaceutical laboratories

Pre-Filter 6-18 months
HEPA up to 2 years (filter life is dependant on the operating environment)

For more critical control of gaseous compounds see our GC ™ Series models.

1 - HEPA Filter (F3) -
1 - Pre-Filter (F1)

5

Filtration Efficiency: 99.97 percent at 0.3 microns
Air Delivery: 270 cfm

For filtration of microorganisms and other particles. Specially designed for infection control units, TB isolation rooms, critical particle control, use in cleanrooms up to Class 100.

33 lbs

1. User Control Panel
2. Carrying Handle
3. No-Draft Diffuser
4. Cleanroom-Grade HyperHEPA Filter
5. Snap-Open Locking Arms
6. High-Performance Centrifugal Fan
7. Advanced Fan Control
8. Pre-Max Pre-Filter (Class F9)
9. Dual Floor Air Intake

Professional Control Airborne Particulates

The IQAir ® Cleanroom Series has been designed specifically for the removal of airborne particles. The systems feature the highest air delivery and longest filter life of any IQAir particle filter system. To allow for maximum air delivery the systems contain no gas phase filtration.

The Cleanroom Series provides a choice of 2 models, each with a specific filter efficiency and air delivery profile. While healthcare facilities may require higher air delivery to achieve optimum control of microorganisms (e.g. in ICUs or TB isolation rooms), a cleanroom facility may need a filtration efficiency of 99.97 percent to meet strict manufacturing regulations or standards.

Positive and Negative Pressure Environments

Each IQAir ® Cleanroom system can be used as a recirculation device or it can be combined with IQAir's ducting adapters InFlow W125 or OutFlow W125 to create positive and negative pressure environments. The creation of negative pressure helps to contain harmful particles, such as microorganisms, in a particular area (e.g. TB isolation).

The creation of positive pressure helps to protect clean areas from contaminants entering from adjacent rooms (e.g. protective isolation of immuno-compromised patients, controlled environments for medical device manufacturing).

Decentralised Airborne Infection Control in Health-Care Facilities

Airborne pathogens in health-care environments pose a particular risk to immunocompromised patients who may inhale fungal spores, bacteria and viruses. Airborne microorganisms can not only complicate recovery from surgery, but can also lead to life-threatening infections,costing health-care services hundreds of millions every year.

Hospital-acquired aspergillosis for example has been recognised increasingly as a cause of severe illness and high mortality in immunocompromised individuals, e.g. patients undergoing chemotherapy and/or organ or bone marrow transplants. In the light of the marked increase in nosocomial infections over recent years, many of which are caused by drug-resistant pathogens, the importance of using high-efficiency air filtration systems beyond the confines of so-called 'critical areas' (such as operation theatres) has once again been emphasised. Both the World Health Organisation (WHO) and the Centers for Disease Control and Prevention (CDC), advise that, wherever possible, preventive infection control measures should be implemented to reduce the risk of nosocomial infections.

1200 sq ft (based on maximum fan speed and an 8.5 ft ceiling)

44 sq ft.

Via diffuser with horizontal 320 degree opening on top of unit

99.97 percent or more at 0.3 microns
99.5 percent for 0.003 microns

195 W

Expanded polystyrene (EPS), chlorofluorocarbon (CFC) - free

2 (fine dust and micro dust filtration)

PC-ABS and ABS (UV-stabilized)

UL/CSA registered

Two side openings at base of unit

99.97 percent at 0.3 microns

With New Filters Installed:
Speed 1 - 45 cfm
Speed 2 - 70 cfm
Speed 3 - 90 cfm
Speed 4 - 155 cfm
Speed 5 - 270 cfm

120 V, 215 Watts, 50-60 Hz. The entire electrical system is UL certified.

Mini-pleat fine dust filter

Centrifugal fan, backward curved, single inlet

32 sq ft

4 key touch pad, 32 character LCD display
Polyester overlay panel

Voltage reductions via capacitor switching

2.5 W

Grounded Detachable 10 foot

Light Gray/Green

6

Maintenance-free steel ball bearings

Liquid crystal display, 16 character x 2 line
Timer Status LED, Filter Life Status LEDs, Fan Speed Indicator LEDs

English, French, German, Italian, Spanish