The VM FlexVac consists of a vertical mount fixture combined with a flexible extraction duct system. The suction duct of the VM FlexVac may be bent, twisted and turned into virtually any position and will remain in place until repositioned. It is made from shatterproof, chemically resistant polypropylene (PP). Its large 5 inches diameter ensures low pressure drop and exceptionally high suction volume. The VM FlexVac typically reduces the air flow of an IQAir filtration device by only 10-25 percent (depending on model and fan speed). At a typical air flow rate of 150 cfm the air velocity within the duct is approx. 12 mph or 17 ft/s.

The VM FlexVac is designed so that all filters remain fully serviceable while the IQAir filtration device remains wall mounted. A locking mechanism ensures that the air cleaner is safely secured within the wall mount.

The VM FlexVac kit is supplied with six universal wall plugs and screws suitable for concrete, brick and dry wall.

The remote control, which is supplied with each IQAir filtration device, ensures convenient operability even when the control panel is out of reach.

Compatible with all IQAir ® filtration devices, except the GCX ™ Series. Not compatible with the following IQAir ® accessories: PF40, FlexVac, InFlow W125 and Mobility 56.

The VM FlexVac kit is supplied with six universal wall plugs and screws suitable for concrete, brick and dry wall. Please ensure that your wall is structurally sound enough to support the weight of your IQAir ® system.

Servicing & Maintenance
The VM FlexVac is designed so that all filters remain fully serviceable while the IQAir ® filtration device remains wall mounted. A locking mechanism ensures that the air cleaner is safely secured within the wall mount.

Technical Specifications

Verticle Mount
Material: 1/16 inch (1.5 mm) steel, white powder coated
Measurements: H 23.6 inches x W 16.1 inches x D 15.2 inches
(H 600 mm x W 410 mm x D 385 mm) 6.7 kg (14.7 lbs.)

Suction Duct
Material: Interlocked polypropylene (PP), mint white
Dimension: 5 inches (125 mm) diameter, 5 foot (1500 mm) length
Maximum horizontal reach: 4 feet (1200 mm)
Minimum bending radius at 25 degrees C (72 degrees F): 360 mm (14 inches)
Service temperature range: -28 to 93 degrees C (-13 to 180 degrees F)

IQAir Compatibility
Compatible with all IQAir filteration devices.
Not compatible with the accessories PF40, MaxVac (not a IQAir product), FlexVac, InFlow W125 or Mobility 56.

210-30-10-10